Active filters

New generation of electric bench tile cutters designed and redesigned for cutting at 90° and 45° angles and making 45° chanfer. Suitable for ceramic, porcelain, marble, granite and natural stone tiles, with smooth, rough or relief surfaces, with thicknesses up to 3.5 cm.

• Cutting disc cooling system with water reservoir and high flow water pump;
• Backrest bar for precise cuts at right (90º) or diagonal (45º) angles;
• Side limiter with angle adjustment;
• Ø 200 mm diamond cutting disc is included. The cut finish may vary depending on the type of material used.

The Side Support is designed to increase the tile support area for large format tiles.

New electric bench tile cutters designed and redesigned for cutting at 90° and 45° angles and making 45° chanfer. Suitable for ceramic, porcelain, marble, granite and natural stone tiles, with smooth, rough or relief surfaces, with thicknesses up to 3.5 cm.

• Cutting disc cooling system with water reservoir and high flow water pump;
• Backrest bar for precise cuts at right (90º) or diagonal (45º) angles;
• Side limiter with angle adjustment;
• Ø 200 mm diamond cutting disc is included. The cut finish may vary depending on the type of material used.

Robust electric tile cutter with reinforced engine. Suitable for cutting ceramic floors and coverings, stones, marble, granite, paver and bricks;

• Reinforced aluminum structure;
• Cutting disc cooling system;
• Retractable easel with wheels for easy transport;
• Sliding table with angle adjustment: 0° to 45° right and left;
• Angular ruler: 0° - 22.5° and 45°;
• Ø 254 mm diamond cutting disc is included. 
• The cut finish may vary depending on the type of material used.

Portable electric tile cutter suitable for cutting at an angle of 90°, 45° and also allows the following materials to be chamfered at 45°: ceramic, porcelain, marble, granite and natural stones, with a smooth, rough or relief surface, with thickness up to 3.4 cm (1.5/16")  and length up to 50 cm (20") (recommended).

• Ø 180 mm diamond cutting disc is included. 
• The cut finish may vary depending on the type of material used.

The Tile Clamp Kit was developed to facilitate the operation with the ZAPP TITAN and ZAPP G2 electric cutters.

Main innovations:

• Eliminates the need to use the hand to support the tile;

• Provides more freedom and safety during the cuts;

• Ensures better cutting precision;

Other characteristics:

• Can be used on the ZAPP Titan and ZAPP G2 line of cutters;

• Kit composed of 2 pieces;

• To perform 45º cuts it is necessary to remove the left side lock;

The Side Support is designed to increase the tile support area for large format tiles.

New generation of electric bench tile cutters designed and redesigned for cutting at 90° and 45° angles and making 45° chanfer. Suitable for ceramic, porcelain, marble, granite and natural stone tiles, with smooth, rough or relief surfaces, with thicknesses up to 3.5 cm.

• Cutting disc cooling system with water reservoir and high flow water pump;
• Backrest bar for precise cuts at right (90º) or diagonal (45º) angles;
• Side limiter with angle adjustment;
• Ø 200 mm diamond cutting disc is included. The cut finish may vary depending on the type of material used.

New electric bench tile cutters designed and redesigned for cutting at 90° and 45° angles and making 45° chanfer. Suitable for ceramic, porcelain, marble, granite and natural stone tiles, with smooth, rough or relief surfaces, with thicknesses up to 3.5 cm.

• Cutting disc cooling system with water reservoir and high flow water pump;
• Backrest bar for precise cuts at right (90º) or diagonal (45º) angles;
• Side limiter with angle adjustment;
• Ø 200 mm diamond cutting disc is included. The cut finish may vary depending on the type of material used.

Robust electric tile cutter with reinforced engine. Suitable for cutting ceramic floors and coverings, stones, marble, granite, paver and bricks;

• Reinforced aluminum structure;
• Cutting disc cooling system;
• Retractable easel with wheels for easy transport;
• Sliding table with angle adjustment: 0° to 45° right and left;
• Angular ruler: 0° - 22.5° and 45°;
• Ø 254 mm diamond cutting disc is included. 
• The cut finish may vary depending on the type of material used.