There are 4 products.

Active filters

STANDARD JOINT SCRAPER

Availability: 857 In Stock

Removes floor and wall joints without damaging the surrounding parts.

Allows you to remove and replace old joints with a new layer.

The Grout Scraper comes equipped with two blades.

Depending on the width of the grout, it is possible to add or remove a blade to decrease or increase the groove opening.

Standard model: maximum groove depth up to 6.0 mm, with a blade thickness of 2.5 mm.

Supra model: maximum groove depth up to 15.0 mm, with blade thickness of 2.5 mm.

Slim model: thin blades for joints with little thickness (from 1.5 mm), with blade thickness of 1.30 mm.

Material / composition: injected plastic handle

. Blade in tungsten steel plate.

Not suitable for Epoxy grout.

SUPRA JOINT SCRAPER

Availability: 858 In Stock

Removes floor and wall joints without damaging the surrounding parts.

Allows you to remove and replace old joints with a new layer.

The Grout Scraper comes equipped with two blades.

Depending on the width of the grout, it is possible to add or remove a blade to decrease or increase the groove opening.

Standard model: maximum groove depth up to 6.0 mm, with a blade thickness of 2.5 mm.

Supra model: maximum groove depth up to 15.0 mm, with blade thickness of 2.5 mm.

Slim model: thin blades for joints with little thickness (from 1.5 mm), with blade thickness of 1.30 mm.

Material / composition: injected plastic handle.

Blade in tungsten steel plate.

Not suitable for Epoxy grout.

SLIM JOINT SCRAPER

Availability: 859 In Stock

Removes floor and wall joints without damaging the surrounding parts.

Allows you to remove and replace old joints with a new layer.

The Grout Scraper comes equipped with two blades.

Depending on the width of the grout, it is possible to add or remove a blade to decrease or increase the groove opening.

Standard model: maximum groove depth up to 6.0 mm, with a blade thickness of 2.5 mm.

Supra model: maximum groove depth up to 15.0 mm, with blade thickness of 2.5 mm.

Slim model: thin blades for joints with little thickness (from 1.5 mm), with blade thickness of 1.30 mm.

Material / composition: injected plastic handle.

Blade in tungsten steel plate.

Not suitable for Epoxy grout.